When HDT’s Space Heater Convective (SHC) heaters are running, the battery pack gets charged by the thermoelectric generator (TEG) on the heater. That’s fine during colder months when the heater runs frequently. During warmer weather, and especially during the summer months, SHC heaters usually sit idle for long periods of time, during which time the battery pack typically loses some charge. With the HDT SHC Battery Charging Rack, the heater battery will stay charged and fully mission capable when temperatures drop and it’s time to use your HDT heater.

Features include:

• The SHC battery charging rack consists of a multi-shelf rack system with three (3) charging trays
• Each charging tray/shelf has charging stations for six (6) SHC batteries (NSN 4520-01-493-2796)
• Batteries can be continuously charged
• The removal of one battery will not disrupt the charging process

HDT’s Zone Pressure Alarm is used in collective protection (ColPro) spaces for real-time monitoring of zone pressure levels. This alarm is used on select U.S. Navy ships and is also suitable for building applications.

• The Zone Pressure Alarm provides both audible and visual warnings if pressure falls below a preset threshold, adjustable over the range of 0.0 to 5.0 in wg
• Along with a two-digit (X.X) display, the Zone Pressure Alarm features long-life green and red LED lamps, as well as a signal out when a remote display is desired
• The Zone Pressure Alarm operates on 110V AC power

HDT’s 35 kW GET/Large Support Trailers are ideal for use with the HDT AirBeam^® shelters. The trailer includes electric power, heating and cooling, and shelter/accessory stowage. The system is optimized to provide ample electric power and environmental control under severe conditions.

• Four variations of this GET are available
  • 35 kw Large Support Trailer with Engine Driven Air Compressor and Hydraulic Lift
  • 35 kW Large Support Trailer with Engine Drive Air Compressor and Manual Lift
  • 35 kW Large Support Trailer with Hydraulic Lift and No Air Compressor
  • 35 kW Large Support Trailer with Manual Lift and No Air Compressor
• 120,000 BTU/H (35.16 kW) cooling capacity, 47,000 BTU/H (13.77 kW) heating capacity
• 208 VAC, 3-Phase, 60Kz generator output
• Forty gallon (151.4 liter) fuel tank
• Fuel requirements: Diesel, DL1, DL2, JP5, JP8
• Operating environment: -40°F to 131°F (-40°C to 55°C)
• Noise level: less than 70 dB at 25' (7.62 m)

HDT’s Modular Deployable Perimeter Security System (MDPSS) is built around a core module that allows the user to integrate a wide variety of sensor and engagement packages onto a stable, elevated platform. The platform is housed in an deployable ISO standard container providing self-contained power and network connectivity with GPS positioning. The system can be used stand alone or networked with other units and systems to provide surveillance and complete perimeter security.

• The HDT MDPSS is multi-use for military, embassy and homeland security applications. It can provide users with the effects ranging from non-lethal to lethal depending on the need and rules of engagement.

Features include:

• ISO-rated Tricon container with integrated:
  • Electro-mechanical lift, built to support employment of sensor engagement packages from elevated positions
  • Power management and back-up
  • Full remote operational control of the container, lift and payload station up to 1000 m (1,093 yards)
• Supports non-lethal devices including:
  • Day and night (thermal) video
  • Audio jammers
  • Loudspeakers
  • Laser dazzler/bright light
  • Flashbang grenades
  • Microwave deterrent
• Networked Ethernet hub for integration and external cueing
• Augments existing security assets and personnel

Developed in conjunction with Special Operations Forces, the HDT Sword ITV (Internally Transportable Vehicle) is a light-weight tactical vehicle that facilitates mission success in austere environments. The HDT Sword ITV ensures mission range, provides multi-role configurations, and can be transported internally by V-22, M/HC- 130P/N/J, C-130/C-130J, KC-130J and C-17 fixed wing aircraft as well as the CH-47 and CH-53 helicopters. And to further enhance mission capability, the vehicle can drive on and drive off these aircraft without shoring and can be deployed through low velocity aerial delivery or JPADS methods.

Features include:

• High performance 230 hp mid-engine design operating on low sulfur JP8/diesel to provide ultimate performance, maneuverability and versatility
• Long travel suspension and optimized approach and departure angles
• Carries up to four litters, in rollover protection system (ROP)
• Performs at 10,000' (3,048 m) above mean sea level with higher horsepower levels than competitive vehicles offer at sea level
• Traverses terrain considered impassable to conventional vehicles, including vertical rock terrain
• Rollover safety for all occupants without limiting mission operational performance
• Extreme maneuverability in rugged environments
• Rapid evasive maneuverability in confined spaces

HDT’s M24 Particulate Filter pairs with HDT’s M23A1 Gas Filter. The filter set removes toxic gases and particulates to provide purified air and positive pressure for mobile shelters and vehicles such as the MLRS (Multiple Launch Rocket System). Additionally, multiple filter sets may be used to provide over pressure protection in shelters.

Features include:

• 150 CFM (255 m³/h) rated air flow
• Particulate media is MIL-F-f1079 with aluminum separators
• Rectangular panel configuration, installs horizontally or vertically
• Pairs with HDT M23A1 Gas Filter

To control a wide range of digital and/or analog sources for quick viewing over multiple monitors or display screens, digital video distribution systems (DVDS) provide the highest degree of video image quality. HDT offers the only Joint Interoperability Test Command (JITC) compliant solution to meet the demands of today’s mission critical digital environment. A built-in video management system enables the input sources connection to DVI and HDMI displays and this unit’s quint-screen output capability allows five separate sources to be displayed on a single screen.

Features include:

• Compact size and reduced weight for easy transport
• Low power consumption
• Fully compliant with Defense Information Systems Agency (DISA) Unified Capabilities Requirements (UCR) standards
• Field upgradable to larger system with optional upgrade kit
• Touchscreen user interface
• Easy setup and operation for quick deployment
• Three year warranty and free tech support for the life of the product

HDT is recognized as the industry leader for expeditionary soft-wall shelters in the military, first responder, emergency response and commercial markets. Evolving from the mil-spec, combat proven Base-X^® Shelter, the Base-Xpress 400 Series shelter utilizes a patented articulating frame constructed from aircraft grade aluminum. Base-Xpress 400 Series shelters provides simple, rapid set-up while reducing the logistical burden associated with legacy shelters.

Features include:

• Set up in only a few minutes with two people
• Light weight
• Scalable with complexing via door openings
• Optional liner
• Variety of available accessories

Designed for deployment in missions and applications where easy transportability and extremely rapid set-up is required, HDT’s Base-Xpress 600 Series shelters fit in storage compartments on emergency vehicles, or in small truck beds. With the smallest configuration weighing in at only 130 lbs (59 kg), Base-Xpress 600 Series shelters provide emergency responders with an easily deployable protective shelter that is functional in minutes.

Features include:

• Small cube size
• Lightweight
• Available in three sizes
• Optional Liner
• Connectible to other shelters via door flange

DRASH^® Satellite Support Systems join satellite communications technology and rugged and reliable DRASH shelters to form a complete integrated shelter system providing personnel with ample workspace, cover and concealment.

Utilizing the DRASH Satellite Support System, which can easily be set up by two personnel in less than 10 minutes, users can connect the various communication platforms in use today, such as the Satellite Transport Terminal (STT) and Warfighter Information Network-Tactical (WIN-T), to any DRASH shelter – providing a larger, more effective work area from which they can operate communications equipment regardless of harsh weather and environmental conditions.

Features include:

• Shelter ensures convenient and tactically safe movement
• Accommodates a wide range of communications platforms, including the STT, WIN-T, JNN, Standard Integrated Command Post System (SICPS)
• Integrated Platform Solutions (IPS) Logistics Support, and Air Defense Airspace Management (ADAM) Cell
• Unique booting system provides a light-tight fabric connection between a vehicle and any DRASH shelter
• Shelter support equipment, including heaters and power distribution units, is also available

Receiving and handling remains is an important responsibility that ensures proper identification and processing of victims of armed conflict or natural or manmade disasters. Mortuary Affairs units need to be able to set up minutes from an incident in order to properly identify victims and prepare them for burial. To preserve the victims before internment, a Mortuary Affairs infrastructure needs to be able to maintain a consistent interior temperature, even in desert weather conditions.

DRASH^® Systems can assist in establishing a scalable collection point for high intensity conflicts or mass fatality disasters. Able to be fully operational within minutes of arrival, DRASH Systems enable Mortuary Affairs personnel to establish a Mortuary Affairs Collection Point (MACP), Mortuary Affairs Decontamination Collection Point (MADCP) or a Theater Mortuary Evacuation Point (TMEP) where and when it is needed most. Additionally, DRASH Shelter Systems come with a complete power package that ensures optimum operations even in extreme temperature conditions.

Option include:

• Roller systems
• Sinks
• Surgical tables
• Decon
• Medical lighting
• Medical equipment
• Climate controlled remains storage
• Body bags
• Remains trays
• Field desks

The MX Solar Shade covers DRASH^® MX Shelters, providing a buffer from the sun and mitigating the effects of extreme heat. It can significantly reduce heat load within a shelter to protect troops, equipment, vehicles, and ammunition. Application of the Solar Shade provides an 85% shading factor, resulting in a 15°F to 20°F (8.3°C to 11.1°C) temperature differential. When used in conjunction with an ECU and/or with a power generator the Solar Shade can reduce fuel costs significantly.

The Solar Shade also blocks harmful UVA and UVB rays: UVA, 320 – 400 nm, 86.3%; UVB, 280 – 320 nm, 84.3%; and thus offers protection from the sun during vehicle maintenance and other outside activities.

The MX Solar Shade integrates seamlessly with existing tactical operations centers and other shelter configurations that use the MX Shelter. It is manufactured with an open-knitted material, allowing breezes to flow through to keep temperatures moderate.

Heat exhaustion, fatigue, and exposure coupled with increasing energy consumption are major challenges for today’s warfighters. The Solar Shade is an effective way of combating these challenges, especially when combined with the DRASH Insulated Liners, and Intelligent Power Technology^® trailers.

Features include:

• Provides 85% shading factor
• Open-knitted material allows for breezes, creating moderate temperatures
• Effective for ammunition storage (Solar Shade Fabric is FR meeting or exceeding California Fire Marshall Code)
• Provides 15°F to 20°F (8.3°C to 11.1°C) temperature differential from outside

Pre-attached collapsible supports keep Solar Shade elevated from the shelter surface, to maximize shade efficacy and also to allow a continuous air flow.

Traditionally, soldiers have relied on analog-based generators to power mobile facilities while deployed in the theater of operations. Using this conventional approach has proven problematic because these generators are only capable of providing their rated amount of electric power. Quite often, this means they must run at peak levels, making them more susceptible to burn outs, more prone to overload, and more likely to shut down when their rated output is exceeded.

Not only are analog-based generators prone to shutdowns, but operating at peak loads around the clock makes them burn exorbitant amounts of fuel, which is ineffective, costly and puts more soldiers in harm’s way. Transporting fuel is complicated and dangerous. Fuel saved translates to more potential lives saved, as less convoys are needed to transfer it to remote operating bases.

These challenges call for a solution of the future but with DRASH that solution is now.
Enter DRASH Intelligent Power Technology® (IPT)– trailers that can easily be reconfigured from one location to the next with a state-of-the-art digital smart system that forms the ultimate networked power micro grid on the battlefield.

DOD Bulk Fuel Supply Chain

Transporting fuel is complicated and dangerous. Fuel saved translates to more potential lives saved, as less convoys are needed to transfer it to remote operating bases.

Source: Office of the Under Secretary of Defense for Acquisition, Technology, and Logistics. “Report of the Defense Science Board Task Force on DoD Energy Strategy ‘More Fight – Less Fuel.’” February 2008.

DRASH^® Intelligent Power Technology^® (IPT) enables generators to operate together with greater efficiency, by reducing fuel consumption, overhead, and mobility.

IPT is delivered field ready to the soldier in a rapidly deployable package. By combining DRASH Intelligent Power Technology with the proven reliability of DRASH Utility Support Trailers (UST), soldiers have a highly mobile and battlefield proven platform that can easily be reconfigured from one location to the next to meet all power generation needs.

IPT operates in the toughest terrain and is easily towed behind common military vehicles. These trailers conform to established “safe to transport” criteria by the Military Transport Management Command (MTMC) as suitable for “secondary and unimproved roads” and sealift transportability. Many trailers are also certified for air transport aboard select military aircraft. They have been tested at the Aberdeen Test Center (ATC) in Maryland and the Nevada Automatic Testing Center (NATC) to meet all U.S. Military standards for trailers.
DRASH Intelligent Power Technology provides soldiers with the capabilities they need to prioritize and control multiple generators, supplying only the power necessary to meet a facility’s immediate operational requirements. IPT is outfitted with a simple and user-friendly touch screen that has robust functionality, so that soldiers can easily control operations from their fingertips.

IPT is designed for plug-and-play. Utilizing the latest in connected cabling, it instantly recognizes additional inputs, and is smart enough self-adjust automatically to power demand changes, without interruption.

This technology also features real-time system performance and diagnostics tools, enabling users to monitor fuel levels, engine temperature, oil pressure, run speeds, and many other essential parameters. Many of these parameters can easily be monitored remotely from inside a DRASH Shelter System. With this capability, soldiers can make sure vital systems are operating in the most efficient manner and optimum output levels, while maximizing fuel efficiency. IPT also saves on maintenance costs and even extends the working life of the system.

Benefits of IPT

TOC Using Analog Trailers

Generators running on “island mode.” From a power perspective, the above tactical operations center (TOC) is comprised of three separate facilities that each require its own generator.

TOC Using DRASH IPT Trailers

DRASH IPT Trailers allow personnel to connect generators to run together as a single power grid and reduce fuel consumption. In this TOC, all generators are working together as a single power grid.

Although relatively new, DRASH Intelligent Power Technology is making its way into the field and can be found supporting numerous programs.

DRASH^® Intelligent Power Technology^® (IPT) Upgrade Kits are now available. Intelligent Power Technology is an advanced smart system that automatically turns generators on and off depending on real-time demands. The kits include all the parts and labor hours to perform the upgrade. The full upgrade kit consists of converting an analog generator to an IPT generator with digital control panel, the converting of the ECU to allow for load shedding and the installation of the quiet fan. The interface, electrical set, and other key components are replaced by a DRASH-certified technician. There are also Analog-to-IPT Generator Kits that convert the generator only. DRASH Trailers with Intelligent Power Technology have been deployed around the globe and are US Army-approved as the new standard for the TMSS Program.

Costs of Upgrading vs. New Trailer Purchase:

• For a fraction of the cost of a new IPT System, an existing analog system can be completely converted to digital and incorporated into a micro-grid
• An entire Brigade TOC (1 TMSS Large and 8 TMSS Mediums) can be converted to IPT for about the price of one Intelligent Power TMSS Large

Benefits Of The Full Upgrade Kit:

• Automatic start/stop power management
• Remote monitoring
• Various grid configurations have yielded a reduction in fuel consumption by up to 65%
• Reduction of ECU noise by 6.5 dbs
• Plug and play capabilities
• Load sharing for equal distribution of power among active generators
• Load shedding to prevent brownouts during sudden peaks in demand
• User friendly touch screen
• Real-time system performance and diagnostic tools
• Reduces the number of generators necessary
• Reduces the number of prime movers required

Component List of the Full Upgrade Kit:

• Housing assembly
• Anti-wet-stacking assembly
• Quiet fan for ECU assembly
• Load shed retro kit
• Fuel tank kit
• Trailer electrical set
• Assorted hardware, cables, connectors and legends

To find out if your analog DRASH trailer can be updated, please contact your BD Representative.

The standard analog control panel

The new upgraded digital control panel